Vivo Y12s Firmware Flash File (Stock ROM). A powerful smartphone isn’t required for everyone. For some, a large battery gadget capable of making phone calls and taking a few photographs is sufficient. Vivo introduced a cheap gadget a few months ago in 2020, catering to such people’s demands. Android 10 and FuntouchOS 11 were pre-installed on the smartphone. This was a low-cost smartphone. Android 11 is expected to be installed on the smartphone.
The newest stock ROM flash file for the Vivo Y12s PD2060F, which is powered by a Mediatek MT6765 Helio P35 CPU, is available in this guide. We’ll need a software called the SP Flash tool to install the firmware flash file, which may also be used to flash the stock ROM on your smartphone. The procedure is basic and straightforward. We’ve also included a video and step-by-step instructions to help you flash the official flash file.
This method may be used to fix a bricked device, fix the lag or shuttering performance, unroot or circumvent the FRP lock, and fix Bluetooth and WiFi problems. So, without spending any more time, let’s figure out what a stock firmware flash file is.
Table of Contents
Vivo Y12s Firmware Flash File (Stock ROM)
Vivo Y12s: Device Overview:
A 6.51-inch IPS LCD display with a standard refresh rate of 60Hz is included on the Vivo Y12s. It has a 20:9 aspect ratio with a resolution of 720 x 1600 pixels. The Mediatek Helio P35, which is based on a 12nm manufacturing technology, has the most processing power. This CPU has four Cortex-A53 cores clocked at 2.35 GHz and four Cortex-A53 cores clocked at 1.8 GHz, making it an octa-core processor.
We have a dual-camera configuration at the rear and a single camera at the front when it comes to cameras. A 13MP main sensor with an f/2.2 lens and a 2MP depth sensor with an f/2.4 lens make up the rear camera. The front of the phone has a single 8MP camera with an f/1.8 lens. Both the front and back cameras can only record movies in 1080p resolution. The Vivo Y12s ships with Android 10 pre-installed with Funtouch 11 OS on top. However, an upgrade to Android 11 is unavoidable.
Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, and MicroUSB 2.0 are among the connectivity options. We also have a fingerprint sensor on the side, as well as an accelerometer, proximity sensor, and compass. The Vivo Y12s comes with three storage options: 3GB RAM + 32GB internal storage, 4GB RAM + 32GB internal storage, and 4GB RAM + 128GB internal storage. A dedicated microSDXC slot is also available for storage expansion. A 5,000 mAh battery powers everything, and it supports 10W standard charging. However, this smartphone can also be used as a power bank, allowing it to reverse charge any other gadget at a rate of 5W. Glacier Blue and Phantom Black are the two color options for the smartphone.
Advantages of Stock ROM:
The reasons why you should download and save the Vivo Y12s Stock ROM flash file to your PC are as follows.
- You can use the Stock ROM file to unbrick your device if it’s dead.
- DB files from Stock ROM can be used to fix or repair the IMEI on your device.
- Malware and adware should be removed from the Vivo Y12s.
- The boot loop issue on the Vivo Y12s can be resolved. On the Vivo Y12s, the app has unfortunately ceased working.
- Fix a network-related problem
- Using Magisk, patch the Boot image to the root directory.
- To Reset or Remove FRP on your Vivo Y12s, you can unroot it.
- Restore the factory settings of the Vivo Y12s.
Firmware Details:
Device Name: Vivo Y12s
ROM Type: Stock ROM
Gapps File: Included
Tool Supported: SP Flash tool
Processor: Mediatek MT6765 Helio P35 Processor
Android Version: Android 10, Funtouch 11
How to Install Vivo Y12s PD2060F Flash File
You should download the firmware flash file before installing the Stock ROM on your Vivo Y12s. Then, on the PC, download and install the USB Drivers and flash tool. After you’ve completed them, you can go on to the stages below. But first, let’s have a look at the relevance of Stock Firmware and the firmware information below.
Pre-Requirements:
- Vivo Y12s is a supported device.
- Make sure your device is charged to at least 50%.
- A USB cable and a PC or laptop are required.
- Make a full backup using any of the methods listed below.
- You Can Download Flash Tool: SP Flash tool
- Download Drivers: VCOM Drivers, and Vivo USB Drivers
Download Flash Files
Flash File Name: PD2060F_EX_A_1.72.25
File Size: 3 GB
File Type: OTA
Android Version: Android 10, Funtouch 11
Flash File Name: PD2060F_EX_A_1.72.20
File Size: 3 GB
File Type: OTA
Android Version: Android 10, Funtouch 11
Flash File Name: PD2060F_EX_A_1.72.3
File Size: 3 GB
File Type: OTA
Android Version: Android 10, Funtouch 11
Flash File Name: PD2060F_EX_A_1.71.30
File Size: 2.7 GB
File Type: OTA
Android Version: Android 10, Funtouch 11
Method 1: Instructions to Install via Recovery:
To begin, you may use the official Vivo device recovery method to install the OTA stock ROM update. To install the OTA update on your Vivo device, go to the URL provided below.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via AFTool:
- To flash the ROM, use the Vivo aftools application.
- Locate the firmware file you downloaded in the AFTool.
- EDL mode should be enabled when you turn on your device.
- In fastboot or EDL mode, you may now connect your phone to your PC.
- To upgrade your firmware, click Start.
Method 3: Instructions to Install via SP Flash Tool:
- Make sure you follow the instructions and download all of the necessary files and flash tools to your computer.
- To access the SP Flash Tool User Interface, run the flash tool exe file.
- In the scatter-loading section, select the Download option and load both the download agent and the scatter text file.
- Click the Download button when you’ve loaded the file.
- To begin the stock ROM upgrading procedure on your Y12s, power off your smartphone and press and hold the Volume Down and Volume Up keys simultaneously while connecting your phone to a
- computer via USB cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
- When your phone is connected, it will begin updating the stock firmware on your device.
- If you see a green button on your flash tool after a few minutes, that signifies the upgrade is complete.
It’s done! - You can reboot your Vivo Y12s.
That’s all there is to it, guys. We hope you were able to successfully install the Stock Firmware on your Vivo Y12s PD2060F smartphone. If you have any questions, please leave them in the comments section below.
. A powerful smartphone isn't required for everyone. For some, a large battery gadget capable of){kind=link}